Matrox MXO User Forum Forum Index

 
 FAQFAQ   SearchSearch         RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Drivers for Matrox MXO2 Family

 
Post new topic   Reply to topic    Matrox MXO User Forum Forum Index -> MXO2 Family and Mojito MAX with FCP X and Compressor (Mac)
View previous topic :: View next topic  
Author Message
rkallstrom@hotmail.com
(MXO2 Mini with MAX)




Joined: 04 Jul 2005
Posts: 0

PostPosted: Fri Mar 31, 2017 8:03 am    Post subject: Drivers for Matrox MXO2 Family Reply with quote

Hello! Is it so that the Matrox MXO2 Family is ? dead product. I can't se that there has been ? update for the drivers for a very long period now.

Best regards
Robert Kallstr?m
Sweden
Back to top
View user's profile Send private message
Matrox_Support_Joe
(Moderator)

Site Admin


Joined: 04 Jul 2005
Posts: 3323

PostPosted: Thu Oct 04, 2018 5:42 pm    Post subject: Reply with quote

Hi. I see that your post was not answered.

Please see this post regarding drivers for Matrox MXO2 family, CompressHD, Mojito MAX and Mojito 4K: http://forum.matrox.com/mxo/viewtopic.php?t=14381

With the latest MAC release (4.6.0.0006), the official supported OS is Yosemite; however El Capitan works as well (unofficially).

If your MAC system and editing software version are supported with Yosemite and El Capitan, then you have the option of setting up a dual boot configuration that will allow you to continue to use your MXO2 hardware:

1. Create an extra boot partition on your hard drive. Instructional video: http://www.youtube.com/watch?v=bea0iNuP5yE

2. Install MAC OSX Yosemite (or El Capitan) on the new partition

3. Install the software applications to be used with the MXO2. List of supported applications:
ftp://ftp.matrox.com/pub/video/doc/MXO2_Supported%20OS%20and%20applications_4.6.pdf
(Note: minor updates to software versions should still work properly)

4. Install MXO2 driver version 4.6.0.0006

-----------------------------------------------------------------------------------------------------------------------------------------------------
Partitions will be setup as follows:

- Boot 1 (existing partition): Sierra/High Sierra/Mojave

- Boot 2 (new partition): Yosemite or El Capitan / Editing application / MXO2 driver 4.6.0.0006

To choose which partition to boot from, hold the 'Alt/Option' key on your MAC when you hear the MAC boot-up sound at startup.
_________________
Regards,
Joe
Matrox Video Technical Support
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matrox MXO User Forum Forum Index -> MXO2 Family and Mojito MAX with FCP X and Compressor (Mac) All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

This board is protected by Phpbbantispam
Powered by phpBB © 2001, 2002 phpBB Group