Matrox MXO User Forum Forum Index

 
 FAQFAQ   SearchSearch         RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Proc Amps on or off for mastering?

 
Post new topic   Reply to topic    Matrox MXO User Forum Forum Index -> MXO
View previous topic :: View next topic  
Author Message
csound
(MXO)




Joined: 04 Jul 2005
Posts: 18

PostPosted: Fri Aug 28, 2009 6:45 pm    Post subject: Proc Amps on or off for mastering? Reply with quote

After calibrating with Proc amps and then monitoring with YUV
uncompressed 1080P output setting in Color 1.4, I've noticed image looks slightly darker & more saturated if Proc amps setup button is left on in Mastering tab.

Can't find a specific reference in user manual if correct operation for accurate monitoring is to leave Proc amps setup on or off after calibrating.

iMac 3.06 ATI 4850 Apple 23 Cinema Display
Back to top
View user's profile Send private message
Matrox_Support_Sam
(Moderator)

Site Admin


Joined: 04 Jul 2005
Posts: 6881

PostPosted: Tue Sep 01, 2009 10:32 am    Post subject: Reply with quote

Hi,

Are you referring to the checkbox option for ProcAmps in the Mastering tab of MXO Preferences?

If so, you should leave the ProcAmps option enabled or checked after you have finished your calibration in order to enable the MXO procamps calibration output. If you uncheck the option, it is as if the MXO calibration tool as been turned off and therefore, no calibration settings will be retained.

Hope this is clear.

Regards,
Sam
Back to top
View user's profile Send private message
csound
(MXO)




Joined: 04 Jul 2005
Posts: 18

PostPosted: Tue Sep 01, 2009 10:46 am    Post subject: Reply with quote

Yes was referring to ProcAmps option. YUV plays with option checked or not so thanks for clarification.
Back to top
View user's profile Send private message
Matrox_Support_Sam
(Moderator)

Site Admin


Joined: 04 Jul 2005
Posts: 6881

PostPosted: Tue Sep 01, 2009 11:11 am    Post subject: Reply with quote

Hi,

Glad the issue has been clarified.

Please let us know if you require additional information in the future.
This post will be locked.

Regards,
Sam
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matrox MXO User Forum Forum Index -> MXO All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

This board is protected by Phpbbantispam
Powered by phpBB © 2001, 2002 phpBB Group