Matrox VS4 User Forum Forum Index

 
 FAQFAQ   SearchSearch         RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Continuous recording

 
Post new topic   Reply to topic    Matrox VS4 User Forum Forum Index -> Pre-Purchase
View previous topic :: View next topic  
Author Message
ComplianceRecorder
(MXO)

Guest





PostPosted: Mon Oct 16, 2017 11:35 am    Post subject: Continuous recording Reply with quote

Can the VS4 Recorder Pro Software be configured to automatically make a continuous recording?

We would like to automatically make a record between 4 and 7 days of programming. Once activated, the recordings would automatically recycle themselves after several days.

Thank you.
Back to top
Matrox_Support_Joe
(Moderator)




Joined: 04 Jul 2005
Posts: 75

PostPosted: Thu Oct 19, 2017 10:41 am    Post subject: Reply with quote

Thanks for reaching out to us with your question.

VS4 Recorder Pro will automatically record continuously provided that the 'Capture duration' option is disabled (see pages 37-38 of the user guide).

Quote:
ftp://ftp.matrox.com/pub/video/doc/Matrox%20VS4%20Installation%20and%20User%20Guide_3.1%20(fix).pdf


The VS4 will not delete files; therefore you would need to write a script on the recording PC to handle when to delete older files that you no longer require.

Hope this helps. Please let me know if you have any other questions.
Back to top
View user's profile Send private message
ComplianceRecorder
(MXO)

Guest





PostPosted: Mon Oct 23, 2017 8:01 am    Post subject: Continuous Recording Reply with quote

Thank you!

I think this will work well for our needs.
Back to top
Matrox_Support_Joe
(Moderator)




Joined: 04 Jul 2005
Posts: 75

PostPosted: Mon Oct 23, 2017 12:37 pm    Post subject: Reply with quote

You're welcome.

If you're looking to build a new system for the VS4, here is a updated system recommendation:

Operating System: Windows 7 (64-bit) or Windows 10 (64-bit)

Mainboard: Intel Ivy Bridge, Hasswell or newer processor. The board should have an available x8 PCIe slot

CPU: Intel i7 3.4GHz or higher with Quicksync enabled. Processor specs can be searched here: https://ark.intel.com/ (search for Intel Quick Sync video)

RAM: Minimum 8GB. Recommended to use Dual Channel RAM (EX: 2 modules of 8GB each for a total of 16GB)

Graphic card: Nvidia GeForce or ATI Radeon class card with minimum 256MB RAM and 3D acceleration; installed in a X16 or x8 PCIe slot on the mainboard.

Storage: Operating System and software installation: One 7200 rpm SATA II hard drive or one SSD drive
Storage of Recordings: One 7200 rpm SATA II hard drive or two 7200 rpm SATA II drives in striped RAID (0) array
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matrox VS4 User Forum Forum Index -> Pre-Purchase All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

This board is protected by Phpbbantispam
Powered by phpBB © 2001, 2002 phpBB Group