Matrox MXO User Forum Forum Index

 
 FAQFAQ   SearchSearch         RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Using Two Matrox Minis Concurrently

 
Post new topic   Reply to topic    Matrox MXO User Forum Forum Index -> MXO2 Family and Mojito MAX with Final Cut Studio & QuickTime based software (Mac)
View previous topic :: View next topic  
Author Message
ciesil
(MXO2 Mini)




Joined: 04 Jul 2005
Posts: 1

PostPosted: Thu Feb 02, 2012 11:25 pm    Post subject: Using Two Matrox Minis Concurrently Reply with quote

Have two Matrox MXO2 Minis. Have tested with this set-up and am able to get each Matrox MX02 Mini to work separately (one to ExpressCard/34 other via Thunderbolt Adapter). The Thunderbolt Adapter is great. No issues. However, when I try to use two Matrox Minis at the same time computer isn't recognizing two. It seems to be only recognizing one which is obviously a problem.

If I want to use two cameras do you think I need to use one Matrox Mini and some other capture card so the computer isn't confused. Or, am I missing something and using two Matrox Minis for a two camera set-up should work?

OS X
MBP 17" - Feb '11
Processor 2.2 GHz quad-core Intel Core i7
Cache 6MB shared L3 cache
Memory 4GB (two 2GB SO-DIMMs) of 1333MHz DDR3 SDRAM; supports up to 8GB
Graphics Intel HD Graphics 30005 and AMD Radeon HD 6750M with automatic graphics switching. 1GB GDDR5 graphics memory.
Hard disk drive1 750GB Serial ATA @ 5400 rpm

Matrox MX02 Mini
Software: 2.3.3

Wirecast 4 Pro
Back to top
View user's profile Send private message
Matrox_Presales
(Moderator)




Joined: 04 Jul 2005
Posts: 882

PostPosted: Fri Feb 03, 2012 2:18 pm    Post subject: Reply with quote

Please note that this post has been moved to the MAC OS: Technical Support section on our user forum for better handling...

Best regards,
B.C.
Back to top
View user's profile Send private message
Matrox_Support_Peter
(Moderator)

Site Admin


Joined: 04 Jul 2005
Posts: 618

PostPosted: Fri Feb 03, 2012 2:38 pm    Post subject: Reply with quote

Hi ciesil,

You can only run one MXO2 on the MAC at a time, therefore the behaviour you are seeing is normal.
_________________
Regards,

Peter

Matrox Video Technical Support
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matrox MXO User Forum Forum Index -> MXO2 Family and Mojito MAX with Final Cut Studio & QuickTime based software (Mac) All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

This board is protected by Phpbbantispam
Powered by phpBB © 2001, 2002 phpBB Group