Matrox MXO User Forum Forum Index

 
 FAQFAQ   SearchSearch         RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

(Problem) MXO2 Mini with Avid MC 5.5.3 Lion 10.7.2

 
Post new topic   Reply to topic    Matrox MXO User Forum Forum Index -> MXO2 Family and Mojito MAX with Avid Media Composer Family (Mac)
View previous topic :: View next topic  
Author Message
Spyros
(MXO2 Mini with MAX)




Joined: 04 Jul 2005
Posts: 5

PostPosted: Thu Nov 03, 2011 1:14 am    Post subject: (Problem) MXO2 Mini with Avid MC 5.5.3 Lion 10.7.2 Reply with quote

Good Morning Sam!!!!

Here to write: (Subsequent testing has demonstrated that the MXO2 2.3.3 release does seem to work with the Lion 10.7.2 update.) (http://forum.matrox.com/mxo/viewtopic.php?t=6805)

1) Don 't compatible with the Mojo dx and must turn off the Mojo to see the Avid the matrox ..

2) I Close the mojo and while everything works correctly and sees the avid matrox not see from the capture tools and do not let me put shots from an external source (Camera or video DV) No with controller with had.

I bought a matrox to pass through devices from SD footage a Mojo is only HD...

My specs:

Mac Pro - Two 2.93GHz 6-Core Intel Xeon- ATI Radeon HD 5770 1GB - Mem 16Gb

Mac OSX 10.7.2


Fault of 100% in 10.7.2???

Thank you!!!!

With appreciation
Spyros Prekas
Back to top
View user's profile Send private message
Matrox_Support_Sam
(Moderator)

Site Admin


Joined: 04 Jul 2005
Posts: 6881

PostPosted: Thu Nov 03, 2011 1:05 pm    Post subject: Reply with quote

Hi,

For issue #1- Yes, this is not supported. You must disable the Mojo hardware when working with Matrox hardware. You cannot have both working at the same time.

For issue #2 - The MXO2 Mini does not support capturing with Avid MC5.5.3. The MXO2 Mini supports output monitoring through Avid MC5. We are looking into supporting capture through the MXO2 Mini in a future driver release.

Hope this information has been helpful.
_________________
Regards,
Sam
Matrox Video Technical Support
Back to top
View user's profile Send private message
Spyros
(MXO2 Mini with MAX)




Joined: 04 Jul 2005
Posts: 5

PostPosted: Thu Nov 03, 2011 2:52 pm    Post subject: Reply with quote

Matrox_Support_Sam wrote:
Hi,

For issue #1- Yes, this is not supported. You must disable the Mojo hardware when working with Matrox hardware. You cannot have both working at the same time.

For issue #2 - The MXO2 Mini does not support capturing with Avid MC5.5.3. The MXO2 Mini supports output monitoring through Avid MC5. We are looking into supporting capture through the MXO2 Mini in a future driver release.

Hope this information has been helpful.


Hi Sam!!!

1) With the upgrade will not fix this ...???

2) I wait impatiently!!!

2),3) And to tell you I can put shots when upgrade;;

Please tell me now there is another program passing shots from the matrox;;;

Thanks for your help!! Smile
Back to top
View user's profile Send private message
Matrox_Support_Sam
(Moderator)

Site Admin


Joined: 04 Jul 2005
Posts: 6881

PostPosted: Thu Nov 03, 2011 4:23 pm    Post subject: Reply with quote

Hi Spyros,

On the Mac with MXO2 Mini, you can capture via the Matrox Vetura Capture. If you are working with Avid, you can also capture to a DxNHD codec by selecting the specific codec in Codec Settings of Vetura application. For more information see User Guide on page 116:
http://www.matrox.com/video/media/pdf/support/mxo2/doc/en_Matrox_MXO2_Installation_and_User_Guide_2_3_3.pdf

Hope this helps.
_________________
Regards,
Sam
Matrox Video Technical Support
Back to top
View user's profile Send private message
Spyros
(MXO2 Mini with MAX)




Joined: 04 Jul 2005
Posts: 5

PostPosted: Thu Nov 03, 2011 11:48 pm    Post subject: Reply with quote

Sam thank you for your help got shots and put them in the avid, so for now I will do the job with vetura capture ...

And wait for the MC 6 and yours upgrade for best results!

Thanks again I appreciate it! Smile


Spyros Prekas
Back to top
View user's profile Send private message
Matrox_Support_Sam
(Moderator)

Site Admin


Joined: 04 Jul 2005
Posts: 6881

PostPosted: Fri Nov 04, 2011 8:59 am    Post subject: Reply with quote

You are very welcome. Please stay posted for any further updates we may have.
_________________
Regards,
Sam
Matrox Video Technical Support
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matrox MXO User Forum Forum Index -> MXO2 Family and Mojito MAX with Avid Media Composer Family (Mac) All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

This board is protected by Phpbbantispam
Powered by phpBB © 2001, 2002 phpBB Group