mx02 rack 720p 50 to 720 30p ?

[nvanhaute]

hi,

I use a max02 rack and I try to test something without success with settings :

my source (IN) is panasonic cam : 720p 50 fps
what I want is to scale the output into : 720p 30 fps

(if that can help, my cam can also deliver : 1080i 50 fps )

is it possible ? with what parameters please.

Thanks


Nicolas

[Matrox_Support_Joe]

Hello Nicolas,

Which Matrox software version are you using? For Adobe CC, you should be running version 4.0.0.0042.

Scaling an input source of 720p 50 (or 1080i 50) to 720p 30 is not supported. For a list of supported scaling options, please see page 174 of the user guide: http://www.matrox.com/video/media/pdf/support/mac/mxo2/doc/en_Matrox_MXO2_Installation_and_User_Guide_4_0.pdf

Please let us know if you have additional questions.
_________________
Regards,
Joe
Matrox Video Technical Support

[nvanhaute]

hi,

ok thanks

in the user guide, I did not find what I can do with source at 1080i 50

is it possible to be in 1080p 50 or at least 1080p 25 ?

thanks

nicolas

[Matrox_Support_Joe]

1080i 50 refers to interlaced fields, which is equivalent to 25 frames. Therefore look at the row for 1080i 25.

1080p 25 is also listed in the chart in the user guide.

You will notice that scaling always requires a similar frame rate. Therefore, scaling any 25 or 50 fps format to 29.97 or 59.94 is not possible using the Matrox hardware.
_________________
Regards,
Joe
Matrox Video Technical Support