Matrox MXO User Forum Forum Index

 
 FAQFAQ   SearchSearch         RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

USBV3 control interface for MXO2? If not, what specs?

 
Post new topic   Reply to topic    Matrox MXO User Forum Forum Index -> MXO2 Family and Mojito MAX with previous versions of Adobe & other supported software (Windows)
View previous topic :: View next topic  
Author Message
Jan J
(MXO2)




Joined: 04 Jul 2005
Posts: 112

PostPosted: Mon Jan 02, 2017 9:49 pm    Post subject: USBV3 control interface for MXO2? If not, what specs? Reply with quote

New PC Laptop didn't even have PCMCIA slot as an option....

Did you ever come up with a USBV3 converter for MXO2?

I have the Matrox Y7348-1100 PCMCIA converter... just no PCMCIA slot!!

If I have to downshift to W7-64 laptop with PCMCIA slot, what is the minimum specs of the laptop for capturing only????

Thanks...
Back to top
View user's profile Send private message
Matrox_Support_Sam
(Moderator)

Site Admin


Joined: 04 Jul 2005
Posts: 6879

PostPosted: Tue Jan 03, 2017 10:43 am    Post subject: Reply with quote

We do not have a converter option for interfacing with the MXO2. Currently, we have PCIe cards for desktop systems, ExpressCard/34
adapter (for laptops) and thunderbolt adaptors (for MAC only).

The same system requirements apply:
User Guide on page 2: ftp://ftp.matrox.com/pub/video/doc/Matrox%20MXO2%20Installation%20and%20User%20Guide_8.0.pdf

Matrox MXO2 system requirements
Matrox MXO2 products require a computer system with the following minimum configuration:
- Intel Core 2 Duo 2.67 GHz or Intel Core i7 2.67 GHz CPU.
Note If you want to use your MXO2 product with Telestream Wirecast, you
must have an Intel Core i7 2.67 GHz CPU or greater.
- Microsoft Windows 7 Professional, Ultimate, or Home Premium (64-bit)
with Service Pack 1.
- 4 GB of RAM (8 GB is recommended).
- One free PCIe slot to install the Matrox PCIe host adapter (for desktops), or
one free ExpressCard/34 slot to install the Matrox PCIe host ExpressCard/34
adapter (for laptops).
- Storage requirements for Matrox ISO recording and Telestream Wirecast
recording to disk:
--Two 7200 RPM SATA II drives in a striped RAID array.
- We recommend an HDMI monitor that supports the following:
An HDMI input resolution of 1920x1080 for previewing all HD formats.
1:1 pixel mapping for displaying your MXO2 output at its exact resolution, and for use with the Matrox HDMI Calibration Utility.
- Adobe Premiere Pro is required if you want to use Adobe Mercury Transmit
for playback on MXO2 with Adobe Prelude.
_________________
Regards,
Sam
Matrox Video Technical Support
Back to top
View user's profile Send private message
Jan J
(MXO2)




Joined: 04 Jul 2005
Posts: 112

PostPosted: Wed Jan 04, 2017 5:57 am    Post subject: Reply with quote

Thanks for that information...
Back to top
View user's profile Send private message
Jan J
(MXO2)




Joined: 04 Jul 2005
Posts: 112

PostPosted: Wed Jan 04, 2017 5:58 am    Post subject: Thanks for the specs! Reply with quote

I understand... Thank You
Back to top
View user's profile Send private message
Matrox_Support_Sam
(Moderator)

Site Admin


Joined: 04 Jul 2005
Posts: 6879

PostPosted: Wed Jan 04, 2017 10:48 am    Post subject: Reply with quote

You are welcome!
_________________
Regards,
Sam
Matrox Video Technical Support
Back to top
View user's profile Send private message
Jan J
(MXO2)




Joined: 04 Jul 2005
Posts: 112

PostPosted: Thu Nov 22, 2018 7:09 am    Post subject: Reply with quote

By the way... I thought you'd like an update on this issue...

I took an old Dell Inspiron 1720, stuffed 6GB ram into it (Yes, 4 +2 works!)
SSD's, W7-64, and upgraded the CPU from 1.53 to 2.2Ghz (with new and better heat sink compound on CPU/GPU.........) [This system started out life as 1.53Ghz, 4Gb Ram, Vista 32]

I did this prior to attempting to use the MX02/PCI adaptor on the system, so I don't have a "Before" test to compare against...

and it works FLAWLESSLY with the MXO2 and PCI slot converter... Even for long 1080i captures!!!

It has become my "Portable" capture station, and has seen lots of use!
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matrox MXO User Forum Forum Index -> MXO2 Family and Mojito MAX with previous versions of Adobe & other supported software (Windows) All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

This board is protected by Phpbbantispam
Powered by phpBB © 2001, 2002 phpBB Group