CC 20015 & CS6 Drivers 8.0 (build 15342)

[nvillamil]

Some users of the Adobe suite, have installed their license suite CS6, and also work according to the needs with the new CC-2015.

Today install the new drivers version 8.0 (build 15342), and have worked well with the CC 2015 version and Mojito MAX card

BUT, my question is, if you also have it installed on the same computer the suite CS6

How I can run the Mojito MAX with Premiere Pro CS6 ???

options to do ???

That the version of Photoshop CS6, works perfect when I use the WYSIWYG Export option works well with matrox driver 8.0


Thanks a lot

[Matrox_Support_Vlad]

The Adobe CS6 is supported under driver version 8.0 (build 15342). For more detailed information on supported applications please refer to link:

http://www.matrox.com/video/media/pdf/support/windows/mxo2/doc/en_Matrox_MXO2_Supported_OS_and_Applications_8_0.pdf

However, running two Adobe applications on the same system could be a bit tricky. It may work fine, also could result Matrox preset to not get detected in one of the application. Basically, we do not know where Matrox plugins will got installed, CC2015 or CS6.

If attempt doesn't work below please find a general procedure to remove all versions of Adobe Creative Suite and install just one.

1. Uninstall Matrox driver using Matrox Uninstaller application.
2. Open device manager, go to Matrox Audio/Video devices, select Matrox Bus and uninstall.
3. Go to c:\program files\ and delete Matrox MtxUtils folder (if it is still there).
4. Go to c:\windows\system32 and delete all files that begin with 'mvk'.
5. Go to c:\windows\system32\drivers and delete all files that begin with 'mvk'.

All Matrox driver files should now be removed from your system. At this point, it would be good to run some system maintenance software. One application you can run is CCleaner. Please visit their website for download and usage information: http://www.piriform.com/ccleaner

Note: It's always a good idea to backup data before performing any system maintenance.
Run the cleaner and register cleaner as well (run it at least 3 times).

Re-reinstall the Matrox drivers making sure that the Windows 7 UAC setting is set to 'never notify' and that the Matrox driver file is unblocked.

PC - Matrox driver uninstall/reinstall procedure

- Uninstall current MXO2 drivers.
- Run Adobe Bridge, click on Help->Updates (apply all updates)
- Re-download the Matrox driver from our website: http://www.matrox.com/video/en/support/downloads/
- After downloaded, right-click the Mtx.utils exe file and select Properties. Under the General tab, click the 'UNBLOCK' command button (if seen).
- Verify that the Windows 7 UAC option is turned OFF (set to Never Notify). How-to link: http://support.microsoft.com/kb/975787
- Run the Matrox Mtx.utils installer
- Shut down the system
- Power cycle the MXO2
- Power the PC
- Check the x.info application and verify that the hardware information is visible (right-click the 'M' icon in the system tray, click on 'Open X.Info'. Then select 'Hardware' from the drop-down menu).
- If all is ok in the previous step, then you can re-enable the Windows 7 UAC option to your desired level
_________________
Best regards,
Tech Support Vlad