Matrox MXO User Forum Forum Index

 
 FAQFAQ   SearchSearch         RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

mx02 rack 720p 50 to 720 30p ?

 
Post new topic   Reply to topic    Matrox MXO User Forum Forum Index -> MXO2 Family and Mojito MAX with Adobe CC 2014 (Mac)
View previous topic :: View next topic  
Author Message
nvanhaute
(MXO2 Rack)




Joined: 04 Jul 2005
Posts: 14

PostPosted: Mon Sep 16, 2013 11:17 am    Post subject: mx02 rack 720p 50 to 720 30p ? Reply with quote

hi,

I use a max02 rack and I try to test something without success with settings :

my source (IN) is panasonic cam : 720p 50 fps
what I want is to scale the output into : 720p 30 fps

(if that can help, my cam can also deliver : 1080i 50 fps )

is it possible ? with what parameters please.

Thanks


Nicolas
Back to top
View user's profile Send private message
Matrox_Support_Joe
(Moderator)

Site Admin


Joined: 04 Jul 2005
Posts: 3323

PostPosted: Mon Sep 16, 2013 11:33 am    Post subject: Reply with quote

Hello Nicolas,

Which Matrox software version are you using? For Adobe CC, you should be running version 4.0.0.0042.

Scaling an input source of 720p 50 (or 1080i 50) to 720p 30 is not supported. For a list of supported scaling options, please see page 174 of the user guide: http://www.matrox.com/video/media/pdf/support/mac/mxo2/doc/en_Matrox_MXO2_Installation_and_User_Guide_4_0.pdf

Please let us know if you have additional questions.
_________________
Regards,
Joe
Matrox Video Technical Support
Back to top
View user's profile Send private message
nvanhaute
(MXO2 Rack)




Joined: 04 Jul 2005
Posts: 14

PostPosted: Thu Sep 19, 2013 4:30 am    Post subject: Reply with quote

hi,

ok thanks

in the user guide, I did not find what I can do with source at 1080i 50

is it possible to be in 1080p 50 or at least 1080p 25 ?

thanks

nicolas
Back to top
View user's profile Send private message
Matrox_Support_Joe
(Moderator)

Site Admin


Joined: 04 Jul 2005
Posts: 3323

PostPosted: Thu Sep 19, 2013 8:48 am    Post subject: Reply with quote

1080i 50 refers to interlaced fields, which is equivalent to 25 frames. Therefore look at the row for 1080i 25.

1080p 25 is also listed in the chart in the user guide.

You will notice that scaling always requires a similar frame rate. Therefore, scaling any 25 or 50 fps format to 29.97 or 59.94 is not possible using the Matrox hardware.
_________________
Regards,
Joe
Matrox Video Technical Support
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matrox MXO User Forum Forum Index -> MXO2 Family and Mojito MAX with Adobe CC 2014 (Mac) All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

This board is protected by Phpbbantispam
Powered by phpBB © 2001, 2002 phpBB Group