OSX 10.8.3 and FCPX 10.0.8

ovimorecp · Joined: 04 Jul 2005 Posts: 30

Has anyone had problems with the new upgrades of OSX and FCPX when using a Matrox Mini with Max?

I am running Firmware Version 15.0
Software Version 3.3.0.0038

I am reluctant to upgrade as my system is work well.

Any assurance would be very helpful.
Thanks
Philip

gloidl · Joined: 04 Jul 2005 Posts: 42

Works perfect with the MXO2 LE for me!

Matrox_Support_Sam · Site Admin Joined: 04 Jul 2005 Posts: 6881

We have not yet certified the MXO2 software with the latest Apple software updates. We will update our users once these Apple updates have been certified.

If you decide to upgrade, this would be at your own discretion.
_________________
Regards,
Sam
Matrox Video Technical Support

ovimorecp · Joined: 04 Jul 2005 Posts: 30

Thanks Sam
can you tell me where to look to see when you have certified the upgrade OK?
Philip

Matrox_Support_Sam · Site Admin Joined: 04 Jul 2005 Posts: 6881

Currently, OSX 10.8.3 has been certified for the MXO2 3.3 software. However, the FCPX 10.0.8 update has not yet been approved with our software. You can find this in the Description section of the Download wizard for your specific software: http://www.matrox.com/video/en/support/downloads/

dunc289 · Joined: 04 Jul 2005 Posts: 17

Matrox_Support_Sam · Site Admin Joined: 04 Jul 2005 Posts: 6881

Glad to hear all is working well now. Yes, we must select the A/V Output setting in FCPX.
_________________
Regards,
Sam
Matrox Video Technical Support

mdiving · Joined: 04 Jul 2005 Posts: 0

Hi everyone I need help
I cant make working MX02 mini max with my FCPX 10.0.8 OSX 10.8.3
Matrox max 3.3.0.0067
iMac 27 intel i7 3.4 Ghz 16 Gb RAM
did I something wrong?
I?ve follow all the step to configurate but nothing system can?t recognized the MX02 mini max on cameras when I import from media
cheers Mariano

Matrox_Support_Sam · Site Admin Joined: 04 Jul 2005 Posts: 6881

Hi Mariano,

Are you trying to import files into FCP X or capture via MXO2? Please note capturing is not supported via MXO2 with FCP X.

In addition, did you uninstall Matrox software before updating to FCP X 10.0.8? Please note FCP X 10.0.8 version is not yet certified with MXO2 3.3 software release.
Have you tried uninstalling and reinstalling MXO2 3.3 software?
_________________
Regards,
Sam
Matrox Video Technical Support

Matrox_Support_Sam · Site Admin Joined: 04 Jul 2005 Posts: 6881

Update: The MXO2 3.3 drivers have been certified with Apple Compressor 4.0.7 and FCP X 10.0.8.
_________________
Regards,
Sam
Matrox Video Technical Support

David Eaks · Joined: 04 Jul 2005 Posts: 5

Has there been a change to the 3.3.0.0067 drivers since they have been certified with Compressor 4.0.7?

I ask because when I last tested FCPX 10.0.8, Compressor 4.0.7 and Matrox 3.3.0.0067 on my secondary edit system (clean install) I got an error, something like "nse 3x exception" when trying to use the Matrox MAX h.264 for Blu-ray settings (which I always use).

I assume that if any changes were made the drivers, that it would be a new version number software.

Thanks

Matrox_Support_Sam · Site Admin Joined: 04 Jul 2005 Posts: 6881

Correct, there have been no changes to the 3.3.0.0067 release. They only have been tested and certified with the new Apple software updates for FCP X and Compressor. Please post any new issues in new thread.
_________________
Regards,
Sam
Matrox Video Technical Support