Matrox MXO User Forum Forum Index

 
 FAQFAQ   SearchSearch         RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

MXO2: 3 suggestions

 
Post new topic   Reply to topic    Matrox MXO User Forum Forum Index -> Pre-Purchase for Matrox MXO2, MXO2 LE and MXO2 Rack
View previous topic :: View next topic  
Author Message
nodiff9
(MXO)

Guest





PostPosted: Sun May 11, 2008 6:53 am    Post subject: MXO2: 3 suggestions Reply with quote

3 suggestions for MXO2

1-As option to MXO2 firewire io due to firewire bandwidth limits, create an express34 io option WITH piggyback slots for another two express34 cards to 'pass data through'! Pass thru good for all the eSATA raids allowing raid5 solutions with FCP and MacBookPro at 200+ MB/s (some raids even around 400MB/s such as Caldigit & Dulce Systems). The 2nd pass through slot good for an Apogee audio io express card solution.

2-Add 2 or 3 ADAT inputs allowing an all-in-one solution for audio users, for two reasons: FCP supports 24 channels of 24bit/96K and Apple Logic audio software users all looking for great io with an Apple laptop. The Apogee 16 channel solution is about $3400. Though Apogee supports 192K, most pros dont use or like higher than 96K for many reasons, and many inexpensive 8 channel mic preamps with ADAT outputs at 48K or 96K (via ADAT SMUX) are available. ADAT io on the MXO2 would allow me an all in one video/multitrack audio solution! ie Mackie 800R, SMproaudio EP84 & Presonus Digimax 96K for ex..

3-Communicate with the top hardware vendors creating a complete Protools/Avid alternative. Aside from MXO2 competition: AJA ioHD; Blackmagic Design, and MOTU V3HD, this includes audio from Apogee's Maestro at Apogeedigital.com and the best and just released Artist series surface controller from Euphonix with a must see online video at: http://euphonix.com/artist/index.php

Matrox MXO2 engineer only: feel free to email me directly at nodiff9@yahoo.com
Back to top
Customer_Care_Bassel
(Moderator)

Site Admin


Joined: 04 Jul 2005
Posts: 582

PostPosted: Mon May 12, 2008 10:04 am    Post subject: Reply with quote

Hi nodiff9, I passed your valuable comments and suggestions to the appropriate department for their consideration.

Best regards,
B.C.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matrox MXO User Forum Forum Index -> Pre-Purchase for Matrox MXO2, MXO2 LE and MXO2 Rack All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

This board is protected by Phpbbantispam
Powered by phpBB © 2001, 2002 phpBB Group