Simultaneous digital and analog output

mw1136 · Joined: 04 Jul 2005 Posts: 2

Hello,

I am wondering if I can configure the Convert DVI to output HDSDI 1080i and composite NTSC simultaneously. The input from the PC is 1080.

This does not seem to work,
Thank you.

Matrox_Support_Vlad · Joined: 04 Jul 2005 Posts: 2

Hi mw1136,

To confirm, you would like to output two different types of signals HD (HDSDI 1080i) and SD (composite NTSC) simultaneously?

We have replicated your workflow on our end and this feature is not supported. However, the Convert DVI allows you to configure simultaneous output on multiple devices as long as you are outputting only one type of signal, either SD or HD. Below, please find supported video output formats as well as a list of supported combinations for simultaneous outputs:

Matrox Convert DVI supported video output formats:
- NTSC
- PAL
- 1280x720p @ 50 and 59.94 fps
- 1920x1080i @ 25 and 29.97 fps

Supported combinations for simultaneous outputs:
- HD SDI output with embedded audio and simultaneous HD analog component output.
- SD SDI output with embedded audio and simultaneous SD analog component output.
- SD SDI output with embedded audio and simultaneous S-Video and composite output

I hope you will find this information helpful but please let us know if you need further technical assistance.
_________________
Best regards,
Tech Support Vlad

mw1136 · Joined: 04 Jul 2005 Posts: 2

Great - thank you for your help on this.
Unfortunately I can't do what I need, but it is good to know the answer.

Matrox_Support_Vlad · Joined: 04 Jul 2005 Posts: 2

Thanks for the update.

We will lock this case but please start a new post for any new issue you encounter.
_________________
Best regards,
Tech Support Vlad