building system on win7 64bits

[Cerebro]

Hi, I'm looking to built a system with axio. I realy don't want to spend in a HP system.
Please let me know if its going to work . Without problems compatibilities etc..
Im working with Comercials, and shorts-movies in HD (recording with sony ex3 xdcam and Panasonic hpx500 p2 DvcproHD.

Case: Silverstone Kublai KL01W
mother: Asus P6TD Deluxe Intel X58 Chipset SLI/CrossFireX
12GB (2GBx6) DDR3/1600MHz Triple Channel Memory Module (Corsair)
ATI Radeon HD 5870 1GB GDDR5 PCI Express 2.0

Please let me know if are there some to change or add to this configuration to work properly

10000000TKS
Pablo

[Customer_Care_Bassel]

Hi Pablo and thank you for your interest in Matrox products...With regards to your question; I do not foresee any issues with your proposed system...In fact we've been having good results with the Asus P6T deluxe. Please check this page for more information on the Axio system requirements.


Best regards,
B.C.

[cerebro]

motherboard.. ok.! but what do you think about de ATI Radeon HD 5870 1GB GDDR5 PCI Express 2.0; You recomend me some other with beter results to work in HD for similar price? and what you think about the case will be good?
tks a lot.

[Customer_Care_Bassel]

Although not tested in-house but the ATI Radeon HD 5870 1GB graphics card is a good match and you should expect good performance out of it in an Axio LE system.
(Please note that nearly all of the recent validation done with display cards and motherboards for Axio LE has shown, extremely high compatibility rate. As a result, Matrox has shifted its consideration to letting customers know whenever there is a possible incompatibly issue. Please check this link for more information on this topic...)


Thanks,
B.C.

[cerebro]

what about the case? can you recomend another case than antec... for example of thermaltake?

[Cerebro]

What you think about the Coller Master 690II Advanced case?
Do you think are there space enough for the card?

[Customer_Care_Bassel]

i don't know of this case...but if it could accommodate the following Axio LE dimensions, then you should not have any problems using this case.

The Axio LE card dimensions are:

- Nominal card dimensions: Card 12.2" x 4.2"
- Card including bracket: 13.875" x 4.9"
- Overall thickness including components 0.75"


Thanks,
B.C.

[Cerebro]

The case CoolerMaster 690 II is a very large mid tower case here's the case's dimensions: 8.4 x 20.1 x 20.8
but
I'm a particular user, I dont have another way to make sure without you.

Please take a look and let me know.
youtube.com/watch?v=hGvBjEmXJnI

tkssss!!!

[Customer_Care_Bassel]

This looks fine...

Thanks,
B.C.